-40%
Mini LED Lighting Warm 0 31/32in Only 0 5/32in Narrow Houses Wagons 20 Piece
$ 10.79
- Description
- Size Guide
Description
To our shopSeller profile
Subscribe to newsletter
Watch article
Follow this seller
TOP categories
Electrical and electronics
LED house lighting
LED wagon lights
LEDs
Optical fiber / optical fiber
Street lamps
characters
Model train track H0
Model train track TT
Model train track N
Model train track Z
Model train track 0
Model train track 1
Model train LGB
Model cars
Trees and landscaping
Model building Schönwitz
Figures Carrera Railway
Cleaning and care
Tools and aids
20 pieces of MINI model lighting - only 4mm wide and 25mm long and only 1mm flat
with 3 super bright SMD LEDs each warm white -
flexible + self-adhesive
here are some application examples:
- Lighting of all kinds of buildings, platform roofing ....
- Interior lighting for your wagons and trains
- Interior lighting for model cars / coaches ....
- illuminate your car racing track, bleachers, cars with interior lighting ...
- Lighting for RC models, cars, ships, planes ....
- Virtrine lighting
- Light in the doll house
- and much more
Technical details:
- Operating voltage: 8 to 14V DC (direct current) or 12 to 16V AC (alternating current)
- The polarity for the connection to direct current is either marked with + and - or if not, you can use the LEDs as a guide. The LEDs have a bevelled corner on one side - the solder joint on the side is a plus.
- When operating on AC power, the LEDs may flicker. In that case, just put a bridge rectifier in between. You can also find these in my shop.
- Current: 20 mA per strip
- Dimensions LxWxH: 25 x 4 x 1 mm
- 3 SMD LEDs per light band, each with a beam angle of 120 °
- Luminous color: warm white
Product information:
- self-adhesive - easy attachment with adhesive tape on the back. Simply peel off the protective film and stick to the desired location.
- Even illumination of the models thanks to the 120 ° beam angle
- Each lighting strip has 2 soldering points at each end, to which the connection cables are soldered.
- You can connect several strips together. The current flows from front to back.
- flexible - therefore very good adaptation to your models (e.g. with curved roofs or around corners)
- Versatile fields of application, e.g. in the area of model making, model railroad, garden train, racing track, RC models, model cars, showcase lighting .....
- When used as wagon lighting for DC railways, you need a bridge rectifier because of the polarity reversal when changing the direction of travel. You can also find these in my shop.
- The brightness of the LEDs can be regulated by means of the input voltage if necessary. Or if you only have a fixed voltage available, you can also switch an additional resistor into the supply line. However, since there is no fixed rule of thumb for this, one should determine the correct resistance value experimentally (by trying it out) and check whether the brightness meets the personal requirements.
- suitable for all gauges
The view of the circuit board foil can differ from the photos. The arrangement of the LEDs and the function is always the same.
Enjoy your shopping!!!
Important note on the purchase process when buying multiple items
When purchasing multiple items, please make sure that you only visit the eBay checkout "pay now" after you have bought all items. This is the only way to combine your order into one order. So that the shipping costs are only calculated once by eBay, you have to go through the purchase process!
Please inquire the international shipping costs for multiple purchases before you pay!
Shipping partner
We ship reliably with DHL and Deutsche Post.
Payment methods
PayPal
Transfer
TOP categories - and much more Shipping partner Payment methods PayPal Transfer
TOP categories - and much more Shipping partner Payment methods PayPal Transfer
TOP categories - and much more Shipping partner Payment methods PayPal Transfer